The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop().
A controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped.
The dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed.
The fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected.
{
"cna_assigner": "zephyr",
"cwe_ids": [
"CWE-476"
],
"osv_generated_from": "https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/79xxx/CVE-2026-79976.json"
}{
"extracted_events": [
{
"range": [
{
"introduced": "4.3.0"
},
{
"fixed": "4.3.2"
}
],
"source": "AFFECTED_FIELD",
"strategy": "StandardRange"
},
{
"range": [
{
"introduced": "4.4.0"
},
{
"fixed": "4.5.0"
}
],
"source": "AFFECTED_FIELD",
"strategy": "StandardRange"
},
{
"range": [
{
"fixed": "60f7fee438504de29f2473d7a8d0535235b983ef"
}
],
"source": "REFERENCES_COMMIT"
},
{
"range": [
{
"fixed": "a097178023785f3bc0a925ac489e490521ca84ea"
}
],
"source": "REFERENCES_COMMIT"
}
]
}
"https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2026-79976.json"
[
{
"deprecated": false,
"digest": {
"function_hash": "313508720730778610314765441693620987811",
"length": 440
},
"id": "CVE-2026-79976-3217158b",
"signature_type": "Function",
"signature_version": "v1",
"source": "https://github.com/zephyrproject-rtos/zephyr/commit/a097178023785f3bc0a925ac489e490521ca84ea",
"target": {
"file": "subsys/pmci/mctp/mctp_i2c_gpio_target.c",
"function": "mctp_i2c_gpio_target_read_processed"
}
},
{
"deprecated": false,
"digest": {
"function_hash": "235851951778166542133007997836273246994",
"length": 702
},
"id": "CVE-2026-79976-8205aab9",
"signature_type": "Function",
"signature_version": "v1",
"source": "https://github.com/zephyrproject-rtos/zephyr/commit/a097178023785f3bc0a925ac489e490521ca84ea",
"target": {
"file": "subsys/pmci/mctp/mctp_i2c_gpio_target.c",
"function": "mctp_i2c_gpio_target_read_requested"
}
},
{
"deprecated": false,
"digest": {
"line_hashes": [
"85797101067115165297917385561480526082",
"119911008358780271815390983526972326539",
"197594909938979789343537286316604140301",
"79489033227311582513503433958895917506",
"252538811133717734200495772428116865866",
"317630236242174488461691221721084815750",
"166516423367581149964891339327631508046"
],
"threshold": 0.9
},
"id": "CVE-2026-79976-c4cc0447",
"signature_type": "Line",
"signature_version": "v1",
"source": "https://github.com/zephyrproject-rtos/zephyr/commit/a097178023785f3bc0a925ac489e490521ca84ea",
"target": {
"file": "subsys/pmci/mctp/mctp_i2c_gpio_target.c"
}
}
]
"2026-11-05T13:08:39Z"