CVE-2026-79982

Source
https://cve.org/CVERecord?id=CVE-2026-79982
Import Source
https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2026-79982.json
JSON Data
https://api.osv.dev/v1/vulns/CVE-2026-79982
Aliases
  • GHSA-w5px-w97v-c3hj
Downstream
Published
2026-10-23T19:56:19Z
Modified
2026-11-05T13:08:40Z
Severity
  • 8.8 (High) CVSS_V3 - CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVSS Calculator
Summary
Out-of-bounds write in the USB Bluetooth HCI transport class when a controller-to-host HCI packet exceeds the bulk endpoint maximum packet size
Details

The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool.

The device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path through LE Extended Advertising Report events, which the controller fragments only to CONFIG_BT_BUF_EVT_RX_SIZE. In the stock configuration the overflow is already reached without any radio traffic: the mandatory Read Supported Commands command-complete event is 70 bytes and overruns the 64-byte slot by six bytes on every host initialization.

Because net_buf_add_mem() validates tailroom only through an assertion unless CONFIG_NET_BUF_HARDENING is enabled, builds with CONFIG_ASSERT=n — the usual production setting — silently corrupt memory adjacent to the USB buffer pool with attacker-chosen contents, which on a target without memory protection between subsystems can lead to arbitrary code execution. Builds with assertions enabled fail the assertion instead and panic, giving a remotely triggerable denial of service. The fix introduces a separate bt_hci_tx_pool sized to MAX(BT_BUF_ACL_RX_SIZE, BT_BUF_EVT_RX_SIZE) for the controller-to-host direction while leaving the host-to-device pool at the endpoint packet size, which is already bounds-checked during reassembly.

Database specific
{
    "cna_assigner":  "zephyr",
    "cwe_ids":  [
        "CWE-787"
    ],
    "osv_generated_from":  "https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/79xxx/CVE-2026-79982.json"
}
References

Affected packages

Git / github.com/zephyrproject-rtos/zephyr

Affected ranges

Type
GIT
Repo
https://github.com/zephyrproject-rtos/zephyr
Events
Database specific
Show details
{
    "extracted_events":  [
        {
            "range":  [
                {
                    "introduced":  "3.3.0"
                },
                {
                    "fixed":  "4.3.2"
                }
            ],
            "source":  "AFFECTED_FIELD",
            "strategy":  "StandardRange"
        },
        {
            "range":  [
                {
                    "introduced":  "4.4.0"
                },
                {
                    "fixed":  "4.5.0"
                }
            ],
            "source":  "AFFECTED_FIELD",
            "strategy":  "StandardRange"
        },
        {
            "range":  [
                {
                    "fixed":  "0419defd2391652edc27689d206fcd9c48439d4a"
                }
            ],
            "source":  "REFERENCES_COMMIT"
        }
    ]
}

Affected versions

v3.*
v3.3.0
v3.4.0
v3.4.0-rc1
v3.4.0-rc2
v3.4.0-rc3
v3.5.0
v3.5.0-rc1
v3.5.0-rc2
v3.5.0-rc3
v3.6.0
v3.6.0-rc1
v3.6.0-rc2
v3.6.0-rc3
v3.7.0
v3.7.0-rc1
v3.7.0-rc2
v3.7.0-rc3
v4.*
v4.0.0
v4.0.0-rc1
v4.0.0-rc2
v4.0.0-rc3
v4.1.0
v4.1.0-rc1
v4.1.0-rc2
v4.1.0-rc3
v4.2.0
v4.2.0-rc1
v4.2.0-rc2
v4.2.0-rc3
v4.3.0
v4.3.0-rc1
v4.3.0-rc2
v4.3.0-rc3
v4.3.1
v4.3.1-rc1
v4.4.0
zephyr-v3.*
zephyr-v3.3.0
zephyr-v3.4.0
zephyr-v3.5.0

Database specific

source
"https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2026-79982.json"
vanir_signatures
[
    {
        "deprecated":  false,
        "digest":  {
            "line_hashes":  [
                "270141513897290598536317698216927553307",
                "71573172233366789006639465512567604424",
                "171802120896063059238414023103787989452",
                "68882491643131598813313075731285745461",
                "8147754703596287397225829953618096227",
                "140687221762693064638125276097029124188",
                "293768067043755720603328409832852791288",
                "90257412149798701634912115789818132598",
                "108912865172136665009539561265869883119",
                "207615469592967829869963837923928529602",
                "329079253981781155825919237862093699003",
                "339027496908679915400045493692826133951",
                "43817714286379705425603463867071829323",
                "22360847348086078846609103868513529500"
            ],
            "threshold":  0.9
        },
        "id":  "CVE-2026-79982-6db550c3",
        "signature_type":  "Line",
        "signature_version":  "v1",
        "source":  "https://github.com/zephyrproject-rtos/zephyr/commit/0419defd2391652edc27689d206fcd9c48439d4a",
        "target":  {
            "file":  "subsys/usb/device_next/class/bt_hci.c"
        }
    }
]
vanir_signatures_modified
"2026-11-05T13:08:40Z"